[Healeys] Cam duration

Michael Salter michaelsalter at gmail.com
Sun Nov 2 11:44:52 MST 2014


Also remember that the convention is to measure the cam angles at 0.050"
clearance to eliminate the errors caused by the ramps.

Michael S
BN1 #174

On Sun, Nov 2, 2014 at 1:39 PM, Wilko2 <e-wilkins at cox.net> wrote:

> Cam specs can be measured in the car using a degree wheel and a dial
> indicator.
>
> Should be measured at the lifter so usually you need the rockers removed.
>
>
> On Nov 2, 2014, at 9:24 AM, I Erbs wrote:
>
> > This talk about cams got me thinking about the hotter cam  in my 3000. Is
> > there any way to determine the specs while it is in the car? I built the
> > engine almost 40 years ago. It is an Iskidarian cam, and after talking to
> > Ed, he cut it to be what he called a "mild" performance unit. How would
> > this effect my timing?
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com


More information about the Healeys mailing list