[Healeys] Crankshaft Nut

[Patrick & Caroline Quinn]

G'day John

It's for the BN3 so therefore think of a 100 chassis which has been cut away
quite a bit at the front (and everywhere else) so the six-cylinder will fit.

Yes a torque wrench does fit.

Hoo Roo

Patrick Quinn
Blue Mountains, Australia

-----Original Message-----
From: john spaur [mailto:jmsdarch at sbcglobal.net] 
Sent: Thursday, 29 May 2014 9:43 AM
To: Patrick & Caroline Quinn
Cc: healeys at autox.team.net
Subject: Re: [Healeys] Crankshaft Nut

If the engine is in the car I don't believe you can get a torque wrench on
the nut.

The nut has a locking tab. Tighten the nut as tight as possible then lock
the tab.

John Spaur
'62 BT7