[Healeys] dash top

[Michael]

Hi DaveOthers may want to chip in here but, my recollection is that the
forward edge of the pad is wedged against the windshield frame then the mirror
screws help hold the back down.
 There are 2 metal tabs on the rear edge of the pad, near each end, which are
bent up under the rear flange of the front shroud.
The pegs on the demister masks also engage in the demister slots in the shroud
to help hold the pad forward against the windshield frame.

-----Original Message-----
From: "Dave Anderson" <bradh904 at gmail.com>
Sent: b5/b4/b2014 2:35 PM
To: "Healeys at autox.team.net" <Healeys at autox.team.net>
Subject: [Healeys] dash top

Gentleman, can someone advise what actually holds the dash top in place on
a BJ8? I know the two screws that hold the rearview mirror in place hold
the middle down but I cannot figure how the ends are secured. Thank you.

Brad Holden
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com