[Healeys] Front Hub Bearing

[Alan Seigrist]

take it to a machine shop and let them figure it out.   It'll probably cost
you $20 to have them pull it.


On Mon, Mar 24, 2014 at 11:41 AM, Elton Schulz <eschulz at frontiernet.net>wrote:

> Fellow Listers,
> I'm replacing my front hubs on my BJ7. The old bearings look good. However
> I can't figure out how to remove the outer race of the inner bearing. There
> is insufficient lip of the outer race to drift it out to the back of the
> hub. Any ideas?
> Thanks,
> Elton
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/healey.nut at gmail.com