[Healeys] Wire wheels

[david cooperman]

Thanks to all.  I was able to finally get it done.  I swore at it then with
two more blows with the Thor hammer it loosened.  Now if only the weather
would get better in Chicago.

David 



On Sunday, March 23, 2014 9:45 AM,
Mike Garvey <r3m1g4 at verizon.net> wrote:
  
I had this problem and tried heat
on the chrome knockoff; just hotter than
you can hold your hand on is about
50C.  This worked.
Mike


-----Original Message-----
From:
healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On
Behalf Of David Cooperman
Sent: Saturday, March 22, 2014 4:05 PM
To:
healeys at autox.team.net
Subject: [Healeys] Wire wheels

Any good hints to get a
stubborn wire wheel off. The knockoffs don't seem to
want to budge at all.
Thanks

David Cooperman
1965 BJ8
$12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/r3m1g4@verizon.net
_______________________________________________
Support Team.Net
http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive:
http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/davidcooperman@yahoo.com