[Healeys] Fuel and clutch line clips

[Michael Salter]

Hi Steve,  they are 6K35. (for the small ones) and the larger one 6K342.
They were made of spring steel. The larger ones were used on the fuel line
of the earlier cars and on the hand brake cable of the 100. The later cars
used a wiring harness style clip for the fuel line.
The repro ones of the 6K35 are okay but break easily if over stressed.
I don't believe that the larger variety are available in repros.

Michael S
BN1 #174





On Fri, Jun 20, 2014 at 8:51 PM, BJ8Healeys <sbyers at ec.rr.com> wrote:

> Hello, Healeyphiles -
>
>
>
> There are metal "hairpin" clips that secure the clutch and fuel lines to
> the
> frame/chassis on a BJ8.  Specifically, there are clips that secure the
> clutch line to the firewall  as it runs across the body number plate at the
> top center of the firewall.  I believe these clips are the same as those
> that attach the fuel and hydraulic lines to the frame rails.  I cannot find
> either an illustration or a part number for them in the BMC BJ7/BJ8 Parts
> Manual.
>
> Are they in the parts manual and I am missing them?
>
> Has anyone ever seen these clips in plastic, rather than metal, in a BJ8?
>
>
>
> Thanks, and Happy Healeying!
>
>
>
> Steve Byers
>
> HBJ8L/36666
>
> BJ8 Registry
>
> AHCA Delegate at Large
>
> Havelock, NC
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com