[Healeys] Overlow

[Per Schoerner]

Ira
I have a feeling your rediator cap is too short. Can you feel the spring 
resistance when you close it, and do you need to press it slightly to 
make it fit in the "threads". The rubber gasket in the bottom must press 
against the radiator hole bottom, to create the necessary pressure in 
the cooling system.
If not, you have the wrong cap.

Per

I Erbs skrev 2014-06-23 04:11:
> Cars running at 192, but I'm getting run off out the vent whole. New rad
> cap with what should have been correct Stant #.
> Added hose to point towards ground. Any other idea s?