[Healeys] Side window mounting

[Michael]

Hi Tom,
Originally a product call "Everseal" was used. This is a strip of "raw" rubber
which, when coated with oil, swells.
It works pretty well but tends to dry out over time allowing the window to
become loose.
Glaziers now use a urethane for this purpose. Known as "The goop from hell"
this stuff works very well but is really difficult to remove should the need
arise.

Michael S
BN1 #174

-----Original Message-----
From: "Tom Felts" <tomfelts at windstream.net>
Sent: b6/b16/b2014 11:45 PM
To: "healeys at autox.team.net" <healeys at autox.team.net>
Subject: [Healeys] Side window mounting

What do you use to get the window to stay in the window frames?  I'm using a
rubber strip and some clear Kwik Seal stuff.  Took a while for it to decide to
stay put---I hope.
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com