[Healeys] B pillar

[Michael Salter]

Hi Ira, for what it is worth this is how I tackle it.
I make up a shim pack that allows me to mount the striker in the correct
position and penetrated as far as possible into the wedge of the door
latch.
I use that set up to adjust the door gaps.
I then remove the striker and position the post cover plate so I can
transfer the hole positions for the striker onto the plate, cut the holes
then mount the plate with spacers between the plate and the door post.
I believe that most cars had a striker shaped spacer between the post cover
plate and the post which is used to position the striker well into the
wedge of the door latch.

Michael S
BN1 #174


On Sat, Jun 14, 2014 at 3:56 PM, I Erbs <eyera3000 at gmail.com> wrote:

> Can I put the b pillar aluminum panel on first?
> I working g on latches and want install it for correct clearance fit, but
> I'm not ready for the rest of the pieces yet.
>
> I Erbs
> IT Consultant
> sent from smartphone, so what you read, may not be what I meant to send.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com