[Healeys] Smitty Speedo cable

I Erbs eyera3000 at gmail.com
Mon Jun 9 07:56:18 MDT 2014


Smitty 5 speed. No adjustment. Will measure Clearance. Just a hint of black
paint at blade tips. Would bad motor mounts cause forward movement?

I Erbs
IT Consultant
sent from smartphone, so what you read, may not be what I meant to send.
On Jun 9, 2014 4:26 AM, "jerry wall" <jwbn6hrdtp at gmail.com> wrote:

> ira,
> you should have 3/4-1" clearance between any fan and the radiator.  make
> sure your rear stabilizer bushings are in good shape. use poly ones over
> rubber.
>
>
> On Sun, Jun 8, 2014 at 6:38 AM, I Erbs <eyera3000 at gmail.com> wrote:
>
>> Using a BJ 8 Speedo cable for length. It won't screw onto adaptor cable on
>> tranny side. end is too small. Do I need custom cable or ???
>> Getting close.
>> Also Texas cooler is just rubbing radiator. Picking up a bit of black
>> paint. Will it flex more at higher speeds?  If so does a stock fan flex
>> that much too? If not anyone have one to sell me or trade for Texas
>> cooler?
>>
>> I Erbs
>> IT Consultant
>> sent from smartphone, so what you read, may not be what I meant to send.
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/jwbn6hrdtp@gmail.com
>>
>>
>
>
> --
> jerry wall  BN6
> rowlett, tx


More information about the Healeys mailing list