[Healeys] spacers behind the wheel hub?

[teamhealeytexas]

I've used aluminum spacers behind the hubs of my '62 3000 BT7 race car for 
20 years, for exactly the reason cited. I used to run 195x65 Yokohama 
A008RS. On hard cornering they would rub the inside wheel wheel. When 
Yokohama stopped making those tires, I switched to Hoosier Speedsters 
205x60. No trouble rubbing the wheel well with the spacers, and my rear 
tires don't extend beyond the edge of the fender. Obviously the outside tire 
wall is further out than a more stock sized tire, but even with the 
Speedsters, the sidewalls are flush with the fender edge using the 5/16 
spacers.

Y'all take care, eh?
Fred Crowley
Team Healey Texas

-----Original Message----- 
From: Jerry Costanzo
Sent: Wednesday, July 30, 2014 6:16 PM
To: healeys at Autox.Team.Net
Subject: [Healeys] spacers behind the wheel hub?

Does anyone use spacers behind the wheel hub?  I have Vredesteins 185/70/15 
on
72 spoke wheels and am seeing tire rub on the inner fender wall, also on the
bolt heads  that hold on the bump stop.  Looks like a 1/8 spacer might
eliminate the rub.
Jerry
BJ8