[Healeys] vinyl piping

[JOHN BAHE SR]

Thanks to all for providing great advice!!  I think I can do this.

John


On Sat, Jul 19, 2014 at 12:28 PM, BJ8Healeys <sbyers at ec.rr.com> wrote:

> John, I never was able to get the piping to stay in place without removing
> the aluminum finisher and gluing the piping to the finisher with contact
> cement.
> Cut "darts" (V-shaped cuts) in the flat part of the piping so it forms into
> a curve easier.
>
> Steve Byers
> HBJ8L/36666
> BJ8 Registry
> AHCA Delegate at Large
> Havelock, NC USA
>
> -----Original Message-----
> From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of JOHN
> BAHE
> SR
> Sent: Saturday, July 19, 2014 9:27 AM
> To: healeys at autox.team.net
> Subject: [Healeys] vinyl piping
>
> Anyone have an easy way or  best method to install the piping on the
> aluminum door finisher that attaches to the shut pillar?   Do you have to
> remove the trim or can you install with the trim attached but loose?  Any
> suggestions are appreciated.
>
> Thanks,
> John A Bahe Sr.
> johnbahesr at gmail.com
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/johnbahesr@gmail.com
>
>


-- 
John A Bahe Sr.
Cell:  (502) 599-2696
johnbahesr at gmail.com