[Healeys] Oil leak

[Ray Juncal]

Ira
   You probably already know that if you tighten the tin cover too much
you deform it at the hold down bosses and wind up not putting any more
pressure on the gasket face where you want it.
Ray



On Saturday, July 5,
2014 12:14 PM, I Erbs <eyera3000 at gmail.com> wrote:
 


Preliminary results
indicate that if you actually tighten the valve cover
nuts. You can quite
substantialy cut down on oil spraying around the
engine. I'll need drive her a
bit more to see if this unorthodox approach
actually works. Stay tuned.

I
Erbs
IT Educator and Consultant
sent from smartphone, so what you read, may
not be what I meant to send.
Suggested annual donation 
$12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/healeyray@yahoo.com