[Healeys] dismantling seat tracks

[goldengt at cal.net]

thanks to all. I got it now. I did take the pins out, but failed to notice that the dimple in the rail forming a hard stop was only on one end. I was pushing the inner rail out from the wrong end.
Ken Freese
65 BJ8

----- Original Message -----
From: goldengt at cal.net
To: "healeys" <healeys at autox.team.net>
Sent: Sunday, January 26, 2014 2:53:14 PM
Subject: [Healeys] dismantling seat tracks

So to dismantle the seat tracks for plating, one has to just use force to spread the outer track enough for some balls to fall out? Is there a tech tip already existing for me?
Thanks,
Ken Freese
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/goldengt@cal.net