[Healeys] dismantling seat tracks

[John Vrugtman]

When I dismantled my tracks, I found that the balls had made impressions 
in the races such that when the seats were in that adjustment spot, 
there was excessive free play due to the depressions in the races.  I 
bought new ones, quite cheap.

John

On 1/26/2014 6:40 PM, Ray Juncal wrote:
> It's been a while but as I recall I removed the drift pin at the end of the
> outside track and slid the two tracks apart.  I also remember some fiddling to
> get the balls spaced out on reassembly.  It's not too difficult.   Hope that
> helps.
> Ray
>
>
>
>
>
> On Sunday, January 26, 2014 3:09 PM, "goldengt at cal.net"
> <goldengt at cal.net> wrote:
>   
> So to dismantle the seat tracks for plating, one
> has to just use force to spread the outer track enough for some balls to fall
> out? Is there a tech tip already existing for me?
> Thanks,
> Ken Freese
> _______________________________________________