[Healeys] Rear main seal

[David Nock BCS]

Steve. WE have the seal available seperatly so you do not have to get the 
entire kit.




David Nock
British Car Specialists
Stockton Ca 209 948 8767
www.britishcarspecialists.com
-----Original Message----- 
From: Wilko2
Sent: Monday, February 24, 2014 11:27 AM
To: BJ8Healeys
Cc: 'David Nock BCS' ; healeys at autox.team.net
Subject: Re: [Healeys] Rear main seal

Yeah. You gotta get that back plate out and cut it to clear the seal holder.

Check out this Youtube video:

youtube.com/watch?v=JYEXtnaZHRk

On Feb 24, 2014, at 11:11 AM, BJ8Healeys wrote:

> O.K., I was mistaken.  The new seal I have IS split.  The spring was 
> holding
> it together so tightly that the split line was not visible, but when I
> removed the spring I could see the split.  On closer inspection, the seal
> retainer now installed in the block is in two pieces.  It was difficult to
> see that without scrunching myself into a contorted position and getting 
> my
> head into the hole in the firewall.
> So, all I have to do now is to remove the engine backplate, yes?  There
> doesn't seem to be enough clearance to get the pieces of the retainer out
> without removing the backplate, or room to install the new seal and 
> spring,
> either, for that matter.
>
> Thanks,
> Steve Byers
> HBJ8L/36666
> BJ8 Registry
> Havelock, NC USA