[Healeys] BN2 Ignition Switch
Richard Korn
cynicbass at gmail.com
Thu Feb 13 13:07:38 MST 2014
Ira,
On the BN2 the hole for the ignition switch is not totally round,there should
be a flat section on the left so the switch will not turn. On my car there is
definitely not a washer between the dash and hex nut.
Richard
Unrestored BN2
Sent from my iPad
> On Feb 13, 2014, at 16:13, I Erbs <eyera3000 at gmail.com> wrote:
>
> I'm having the same issue. My switch just spins in the hole.....
>
> Ira Erbs
> Portland, OR
> _______ _______
> (______ \____1960 BT7____/ _______)
> (_________________________)
>
>
>> On Thu, Feb 13, 2014 at 6:23 AM, Donald Tate <bn2cars at gmail.com> wrote:
>>
>> Is there supposed to be a thin washer behind the nut that holds the
>> ignition switch in place? Tightening the nut against fresh paint is just
>> asking for trouble and there's not enough thread for a washer of normal
>> thickness. If you know the answer and a source, it would be greatly
>> appreciated.
>>
>> TIA,
>> Don Tate
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/cynicbass@gmail.com
More information about the Healeys
mailing list