[Healeys] BN2 Ignition Switch

[Oudesluys]

The Lucas switches I have , all have thin plain chrome washers or blued 
"waved" washers under the chromed nut.
Kees Oudesluijs


Donald Tate schreef op 13-2-2014 15:23:
> Is there supposed to be a thin washer behind the nut that holds the
> ignition switch in place?  Tightening the nut against fresh paint is just
> asking for trouble and there's not enough thread for a washer of normal
> thickness. If you know the answer and a source, it would be greatly
> appreciated.
>
> TIA,
> Don Tate
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2014.0.4335 / Virusdatabase: 3697/7088 - datum van uitgifte: 02/12/14