[Healeys] Battery Not Charging

[Oudesluys]

In general one needs to take off the smallest of skims of a commutator 
when renewing the brushes to make everything absolutely true. At some 
point you will have to grind flat a hacksaw blade and remove some 
insulating material between the copper segments. The insulation should 
be about 0,5-1mm below the surface. When renewing the phosphor bronze 
bush do not forget to soak it in oil first for 24 hrs. or heat it in an 
open small oil container "au bain marie" (ask your wife) (on second 
thoughts may be not) and let everything cool down before removing it 
from the oil.
In the past I replaced those bushes with a ball bearing, a fairly simple 
job if you have access to a lathe and know how to work it.
Did you refit your wiring correctly? Broken/dodgy wire/connector? Are 
the brushed moving freely? Do they have enough length? Your WSM will 
specify the minimum lenght.
Kees Oudesluijs
NL


john spaur schreef op 2-2-2014 3:11:
> Do you get a voltage from the generator showing it is putting out 
> electricity? What shape is the commutator in? One needs to scribe down 
> the plastic between the copper segments so separate them.
>
> John
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2014.0.4259 / Virusdatabase: 3684/7052 - datum van uitgifte: 
> 02/01/14