[Healeys] BN1 Gearbox Reverse Detent Spring

[Alan Seigrist]

Michael -  I am pretty sure the later 3-spd boxes don't have that plunger,
that's the plunger on the shift gate plate, correct? I think they only ever
put those on the converted A90 boxes, which yours will have. Alan

On Thursday, December 18, 2014, Michael Salter <michaelsalter at gmail.com>
wrote:

> I'm rebuilding a BN1 Gearbox and have found that the reverse check plunger
> (detent plunger) spring part number 2K4909 is missing.
> I can't imagine how anyone could drive a BN1 without that check plunger
> working but that is a different matter!!
> I have found a spring amongst my pile of compression springs which seems to
> fit onto the plunger correctly but I have no way of confirming that it is
> the correct spring which seems to be unique to this application.
> It has a free length of 1.1", 12 turns of 0.058" wire and an OD of 0.313".
> Does anyone have a BN1 box apart and can confirm that I have the correct
> spring.
>
> b Michael S
> BN1 #174b
>
> --
> *If you can't fix it with a hammer, you've got an electrical problem.*
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net <javascript:;>
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com