[Healeys] Oil vent

[Oudesluys]

You should not connect it up to a vacuum nipple on the inlet manifold, 
to high a vacuum. It is ever so simple to fit a nipple to the K&N filter.
Kees Oudesluijs


I Erbs schreef op 30-8-2014 0:02:
> I have bj8 carbs and manifold on my bt7. Can I run the oil vent hose into
> the vacuum nipple on the intake? I do not have the nipple on my k&n air
> filters. I bought a cool looking vent breather filter, but I don't like the
> smell of oil vapor.
>
> Ira Erbs
> Portland,OR
> IT Educator and Consultant
> sent from my smartphone. what you get, May not be what I meant to send
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2014.0.4745 / Virusdatabase: 4015/8122 - datum van uitgifte: 08/29/14