[Healeys] rally gear shift knob with OD switch

[Bob Haskell]

Listers,

I assume that when fitting a gear shift knob with an OD switch that you 
have to run the wires from the new switch back to the old switch on the 
dash.  Otherwise, if you connected the new switch in front of the 
gearbox switch, you'd have to jumper the two leads at the old switch 
together to energize the relay to get power to the lead going to the OD. 
  The relay would be energized all the time; bypassing the relay and the 
throttle switch would give the same, but not necessarily desirable 
result. Right?

Cheers,

Bob Haskell
AHCA 3000 Mk I registrar
http://www.ciahc.org/registry_3000mk1.php