[Healeys] fan shroud

[Patrick & Caroline Quinn]

G'day

I have done the same. Just drain the coolant and remove the paint from where
you wish to solder. Heat up and solder away. Repaint once it's cooled.

Hoo Roo

Patrick Quinn
Blue Mountains, Australia

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of Simon Atkinson
Sent: Monday, 21 April 2014 9:56 AM
To: Sid and Maria
Cc: <Healeys at autox.team.net>
Subject: Re: [Healeys] fan shroud

You can solder in place but expect the paint on the radiator or shroud to
bubble. Same would be if you took it to a shop

Thanks,
Simon
Cell 860-324-0248



> On Apr 20, 2014, at 7:29 PM, "Sid and Maria" <scbronson5 at msn.com> wrote:
>
> the solder on the fan shroud on my bj8 is coming apart and I donbt
> want it to come loose would epoxy or jb weld be the better choice in
> donbt want to pull the radiator just for that
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html Suggested annual
> donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/satkinson1974@gmail.com
$12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/p_cquinn@tpg.com.au