[Healeys] (no subject)

[Jonas Payne]

Used dremel to cut a slot across it so it can now be installed/removed with a
std. screwdriver, at least for the next 40 years, then Ibll have to figure
something else out.



Problem solved without needing to go on an unobtanium search.



Jonas Payne

PBR Consulting Services, LLC

702.882.6711



From: Michael Salter [mailto:michael.salter at gmail.com] On Behalf Of
michaelsalter at gmail.com
Sent: Friday, April 4, 2014 3:04 PM
To: healeys at autox.team.net; Jonas Payne
Subject: Re: [Healeys] (no subject)



Hi Jonas,

Being a Lucas product my bet is that it is a British Association thread (BA).

Based upon Steve measurements it looks like it would be 4BA for which the
specs are:

Pitch 0.6600mm

Depth of thread. 0.395 mm

Major diameter 3.6 mm

Effective diameter. 3.205mm

Minor diameter. 2.81mm

TPI (approx.) 38.5



May be tough to find a Home Depot!!



Michael S

BN1 #174



From: Steve Gerow <mailto:steveg at abrazosdata.com>
Sent: bFridayb, bAprilb b4b, b2014 b5b:b43b bPM
To: healeys at autox.team.net <mailto:healeys at autox.team.net>



Jonas Payne wrote:

Anybody know what thread type is holding the condenser to the plate in the
dist?






I just measured a spare at 6-40



--



Steve Gerow

Altadena, CA, USA

BN6
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net <mailto:Healeys at autox.team.net>
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com