[Healeys] HEAT SHIELDS

[Oudesluys]

For the metal shield, use highly polished (both sides) stainless steel.
Kees Oudesluijs


john spaur schreef op 1-4-2014 21:25:
> Try using metal on stand offs like contemporary cars. Asbestos or any 
> other material heats up and retains the heat. Metal shields will 
> dissipate the heat better.
>
> John
>
> At 07:02 PM 4/1/2014 +0000, Mitch wrote:
>> Thanks for the replies..........
>> B
>> These are asbestos heat shields.........The only one I am concerned 
>> with is
>> the vertical piece drivers foot boxB ......where the exhaust comes 
>> down and
>> under.
>> I am currently fitting Kirk headers (what a treat!)B  and I had to 
>> cut shield
>> for clearance ......thus the problem.B  the rest of the shields are 
>> fine.
>> I WANT THE FOOTBOX INSULATED FROM THE EXHAUST HEAT..........how well 
>> does
>> Hardy board insulate?B  I just need the one piece I could make it 
>> easy enough
>> just need to know whats the best material to 
>> use.........................any
>> ideas?
>> B
>> Thanks to all
>> Mitch
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage: 
>> http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2014.0.4355 / Virusdatabase: 3722/7279 - datum van uitgifte: 
> 04/01/14