[Healeys] Steering column issue

[john spaur]

Richard,

Too much heat will cause the solder to fail and not adhere. MAPI gas 
is sufficient. It is possible some of the boxes were assembled with 
silver braze which has a higher melting point than solder or silver 
solder. The rocker shaft oil feed pipe is silver braze.

John

At 07:30 PM 9/30/2013 -0700, john spaur wrote:

>At 01:31 AM 10/1/2013 +0000, richard mayor wrote:
>>I applied massive heat to the box to melt the solder with my oxy torch