[Healeys] Request Diameter of Master Cylinder hole

Steve B. Gerow steveg at abrazosdata.com
Sun Sep 8 12:03:28 MDT 2013


Thanks, Perry, that's exactly what I need.

I'm making an adapter plate for my Fiat 124 tandem master cylinder because the mounting flange is at an angle and I want to make sure all the holes line up and know what the tolerances are I'm dealing with.

Thanks again.


-- 
Steve Gerow



>  -------Original Message-------
>  From: Perry <healeyguy at aol.com>
>  To: Steve Gerow <steveg at abrazosdata.com>
>  Cc: <healeys at autox.team.net> <healeys at autox.team.net>
>  Subject: Re: [Healeys] Request Diameter of Master Cylinder hole
>  Sent: Sep 08 '13 09:47
>  
>  Firewall 1.430"
>  Pedal bracket 1.455"
>  Aloha
>  Perry
>  
>  Sent from my iPhone
>  
>  On Sep 8, 2013, at 12:31 AM, "Steve Gerow" <steveg at abrazosdata.com> wrote:
>  
>  > If someone has the master cylinder out of their car, would appreciate it if
>  > you could take calipers and give me the exact diameter of the hole in the
>  > firewall the MC goes through.
>  >
>  > If the hole in the pedal box is smaller, would appreciate that dimension,
>  > too.
>  >
>  >
>  >
>  > Thank you in advance.
>  >
>  >
>  >
>  > --


More information about the Healeys mailing list