[Healeys] Temp sensor

[Don]

When I had this same problem, I found out I was able to buy a oxygen sensor
wrench . Used on modern car exhaust systems O 2 sensors .They come with a slot
cut out which allowed the capillary tube to slot through and it allowed me to
remove my temp. Sensor probe.
        Don

Sent from my iPad

On Sep 1, 2013, at 8:48 PM, Richard Ewald <richard.ewald at gmail.com> wrote:

> What the hell kind of cheap ass wrench did you buy?
>
> Sent from my iPhone
>
> On Sep 1, 2013, at 17:16, I Erbs <eyera3000 at gmail.com> wrote:
>
>> Bought a flared nut wrench. It broke.
>> Cut a box end wrench open and in half..
>> Nut head too rounded. Keeps slipping. Used a 6 point plug socket with slit
>> cut..and hose clamp.... Still no joy.
>>
>> Can't file nut as it sits under head piece that overhangs. Can't get vise
>> grips on for same reason
>> The $250.00 rebuild solution is looking like the only option after I cut
>> the capillary tube.
>> Also tried heat gun....
>>
>> Ira Erbs
>> Portland, OR
>> please excuse typos. Sent from my phone
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/richard.ewald@gmail.com
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/fsufan1952@yahoo.com