[Healeys] bullet connectors

[llennep at verizon.net]

Not a big deal to use a soldering gun to heat up the old ones and remove them
from the wires.  Then solder them to the new harness.

Keith


On 10/09/13, Michael Salter wrote:

Sorry Tom, not well at all.
They have a diameter of 0.158" whereas the correct ones are 0.183" so the
commonly available ones are too small.
The originals were soldered on but most people now use the "crimp" type which
are virtually indistinguishable when installed.
M Motors sells them and the crimping tool.

Michael S
BN1 #174


-----Original Message-----
From: "Tom" <ah3000me at gmail.com>
Sent: b2013-b10-b09 4:17 PM
To: "Healey Mail List" <healeys at autox.team.net>
Subject: [Healeys] bullet connectors

While looking thru the goodies at our local hardware store, I noticed that
they sell bullet connectors with blue plastic bodies. Will those bullet
connectors work with our Healey's bullet connectors?

- Tom
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/llennep@verizon.net