[Healeys] High speed miss - CARBS? - followup

[john spaur]

Bob,
They were properly matched, however, I did try switching the pistons 
around but it did not work. Adjusting them all to the same spec worked.

John

At 06:29 AM 10/1/2013 -0400, Bob Haskell wrote:
>John,
>
>The piston/dampers are treated as a set.  That's why the manual said 
>to replace both.  You could have tried different piston/damper 
>combinations until the drop time was the same for all three.  I've 
>been told that it's more critical to have the carbs drop at the same 
>rate rather than to be in spec.  But I don't know how far out of spec is okay.
>
>Bob Haskell