[Healeys] Clutch Slave Question

I Erbs eyera3000 at gmail.com
Sun Nov 17 16:03:11 MST 2013


makes sense. Never thought of it that way

Ira Erbs
Portland, OR
   _______                                  _______
     (______ \____1960 BT7____/ _______)
         (_________________________)


On Sun, Nov 17, 2013 at 2:09 PM, Michael Salter <michaelsalter at gmail.com>wrote:

> The rod length should be such that when you push it into the slave
>  cylinder
> as far as it will go (easily) you should just be able to slip the clevis
> pin
> in.
> The rod should be pushing the piston as far into the cylinder as it will
> go.
>
> Michael S
>
> -----Original Message-----
> From: "Team.net" <lawrence.swift at gmail.com>
> Sent: b 2013-b 11-b 17 4:57 PM
> To: "Healeys at autox.team.net" <Healeys at autox.team.net>
> Subject: [Healeys] Clutch Slave Question
>
> I replaced the rod in the clutch slave on my BT7 and no longer can shift
> out
> of neutral.
>
>
>
> Does anyone know how long the rod should be (I can't find the old one - put
> it in a safe place); I understand now that new ones may be a bit shorter.
>
>
>
> Thanks,
>
>
>
> Larry Swift
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com


More information about the Healeys mailing list