[Healeys] Water Temp gauge problem

[BJ8 Healeys]

I'll add my endorsement for West Valley.  They have repaired a couple of
instruments for me and I was very pleased with the results and their
service.

I did have a problem with Mo-Ma sending back a fuel gauge that had no socket
(or "chimney", as they called it) for the panel light.  I had to return it
and they sent back the gauge I had sent them for repair.

Steve Byers
HBJ8L/36666
BJ8 Registry
Havelock, NC  USA

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of Charley Braum
Sent: Friday, May 24, 2013 2:55 PM
To: healeys at autox.team.net
Subject: Re: [Healeys] Water Temp gauge problem

         "sent it to Morris at West Valley Instruments; couldn't be happier
with the results (also found almost 20psi of oil pressure at idle I had
never had before)."

     Couldn't agree more with your choice of vendor. I've been using WV for
my repairs and have recommended lots of folks with all great results.

     Later,

             CB