[Healeys] Powder on Springs
coudesluijs at chello.nl
Sun May 12 23:59:59 MDT 2013
Ham fisted sandblasting will always cause damage. To generate so much
heat while sandblasting these springs must have taken quite some effort.
Always use a fine grit or glass beads and moderate pressure and check
the heat regularly in the springs while at the job. It should not cause
any problems at all, unless the springs are so rusted that they should
be renewed anyway.
Op 12-5-2013 23:06, Per Schoerner schreef:
> Well, friend of mine sand blasted his springs, and painted them. They
> looked really nice, but they didn't work as springs after fhis
> treatment. The sand bvlasting destroyed the spring effect on them. The
> blasting produces heat which apparantly is as dangerous to springs as
> heat applied to cure paint.
> Per in Sweden
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Healeys at autox.team.net
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2013.0.3336 / Virusdatabase: 3162/6318 - datum van uitgifte:
T: 078-677 1233
E: coudesluijs at chello.nl
Technische commissie Jensen Healey en GT
Het Jensen Genootschap Holland
More information about the Healeys