[Healeys] Tires What's the rub? problem solved
Bob Spidell
bspidell at comcast.net
Fri May 10 13:55:04 MDT 2013
Keep corrosion at bay-->paint (if you really, really want to next time you have them out--not an easy job).
Easy to keep clean-->water
Can't think of anything much worse than wrapping steel in plastic to encourage rusting (right up there with undercoating). The Alfa springs were probably dipped (and how do you know they're pristine under the tube/coating?).
Think I'd replace the muffler bearings first (http://kalecoauto.com/index.php?main_page=product_info&products_id=48 )
Bob
--------------------------------
Bob Spidell - San Jose, CA
----- Original Message -----
Keep corrosion at bay? Easy to keep clean?
--- On Fri, 10/5/13, Bob Spidell <bspidell at comcast.net> wrote:
From: Bob Spidell <bspidell at comcast.net>
Subject: Re: [Healeys] Tires What's the rub? problem solved
To: healeys at autox.team.net
Date: Friday, 10 May, 2013, 19:54
Why bother?
Bob
--------------------------------
Bob Spidell - San Jose, CA
----- Original Message -----
Apropos the front springs, what are the group's thoughts on putting a plastic
sleeve on them, i.e. a half-inch or so inside diameter tube running the length
of the coil. My wife's Alfa has this arrangement and they are pristine.
Regards, Lodge, BJ8, Vancouver.
_______________________________________________
More information about the Healeys
mailing list