[Healeys] Engine Plate

[Oudesluys]

Better use a Dremel or similar, with a cutting disc. Much easier and 
safer, but you do need a steady supported hand.
Kees Oudesluijs
NL

Op 4-5-2013 12:35, HealeyRick schreef:
> Niels,
>
> Use a hacksaw to cut a slot in the top of the screws and use a
> screwdriver to turn them out.
>
>   
> Rick
>
>
> "Madman in a death machine"
> Follow My
> Nasty Boy Build:  http://tinyurl.com/yj52fwo
> ________________________________
>   From: Niels Bengaard <bengaard at 850r.dk>
> To:
> "Just Brits " Shop" <shop at justbrits.com>; healeys at autox.team.net
> Sent:
> Saturday, May 4, 2013 5:07 AM
> Subject: Re: [Healeys] Engine Plate
>   
>
> Any good
> tips on buggering up those screws that works when the engine is
> still in the
> car?
> Have tried turning with a wrench but gave up.
>
> Niels