[Healeys] brake light switch

[Bob Spidell]

Did you let Moss know about the problem?  They're generally good about addressing issues with their parts--I just had a 
productive exchange with one of their people over a new safety gauge they're selling.  They take either email or phone 
inquiries--in my case they did both.

Bob



On 3/21/2013 10:33 PM, healeymanjim at hansencc.net wrote:
> the switch i removed had tapered threads.  i got the switch from moss and in my experience usually if the threads are not tapered pipe threads a small copper washer should be used.  i should have put one on the first time but was not sure it was needed.  now i know.  i was reluctant to tighten it real tight the first time which caused fluid to leak around the threads when brake pressure was applied.  used almost a complete resevoir full of fluid before catching it.  not good!!
> _______________________________________________
>
>


-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell at comcast.net

*******************************************************************