[Healeys] clunk on braking

[Bob Spidell]

I'm gonna take a SWAG on U-joint(s), although you usually get the 'clunk' on acceleration.

Is there a difference if you apply brakes coasting in gear vs. coasting in neutral?

Bob


On 3/4/2013 7:17 PM, Richard Kahn wrote:
> I am trying to track down a soft clunk in the rear when I apply even slight
> brake pressure. (Phase 1 BJ8) Not junk in the boot. Hubs and wheels replaced.
> Master cylinder and wheel cylinders replaced and well bleed. Good tight
> brakes. The shocks are tight and new leaf springs made not change. Any ideas?
> Rich Kahn
>
>
>


-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell at comcast.net

*******************************************************************