[Healeys] 2" distance block

[Patrick & Caroline Quinn]

G'day Tim

Is it that simple. In fact all I did was use some left over offcuts from a
desk I made, cut them so that they were 2in tall and narrow enough to fit
between the horizontal suspension post and the round pad of the shock absorber
arm.

Don't let anyone try an complicate matters for you as it's dead simple.

Hoo Roo

Patrick Quinn
Blue Mountains, Australia

-----Original Message-----
From: Tim Davis BN7 [mailto:tld6008 at mchsi.com]
Sent: Tuesday, 18 June 2013 11:20 AM
To: Patrick & Caroline Quinn
Cc: caddi5 at comcast.net; healeys at autox.team.net
Subject: Re: [Healeys] 2" distance block

" All I did was to cut a small piece of wood to size. "

It can't be that simple.

Tim Davis BN7

----- Original Message -----
From: "Patrick & Caroline Quinn" <p_cquinn at tpg.com.au>
To: caddi5 at comcast.net, healeys at autox.team.net
Sent: Monday, June 17, 2013 5:36:14 AM GMT -06:00 US/Canada Central
Subject: Re: [Healeys] 2" distance block

G'day Mitch

Speaking from very recent experience I can tell you that it's 2in from the
horizontal suspension post (where the shock is bolted) and the flat pad of the
shock absorber arm.

All I did was to cut a small piece of wood to size.

Hoo Roo

Patrick Quinn
Blue Mountains, Australia

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of caddi5 at comcast.net
Sent: Monday, 17 June 2013 8:06 PM
To: healeys at autox.team.net
Subject: [Healeys] 2" distance block

I am currently beginning work on the front suspension 1966 BJ8
.............What is the actual measurement of this wood block (spacer)	 is
it 2" tall ??

Thanks
Mitch