[Healeys] Two-inch Blocks

[john spaur]

Make sure to use bolts that are same diameter as the plate bolts. 
That will help align all four spring plate base holes and make the job easier.

John Spaur

At 07:57 AM 6/16/2013 +0800, you wrote:
>Run a couple of very long bolts on the A-Arm plate (in opposing corners)....
>
>On Sun, Jun 16, 2013 at 7:24 AM
>Patrick & Caroline Quinn <p_cquinn at tpg.com.au> wrote:
>
> > .... Apart from having lots of fun lining up the holes for the 
> bottom spring plates....
> >
> > Patrick Quinn