[Healeys] (no subject)

[Michael Salter]

I always got a giggle out of this one...

Wiring, disconnect and remove all wiring, fit new front
and rear harness complete, reassemble, and test . . . . . . 12

MATE YOU'RE DREAMIN' !!!

I'll take my hat off to anyone who can do that job in 12 hours!!

Michael S


On Thu, Jun 13, 2013 at 4:21 PM, HealeyRick <healeyrick at yahoo.com> wrote:

> Found a copy of the BMC flat rate manual for the BJ7 on John Sims'
> excellent
> Healey6 site
>
> Here's some times to try for on your next job:
>
> Engine and
> gearbox, remove from frame, fit replacement
> power unit, change over all
> ancillary equipment, including
> cleaning and adjusting carburetters,
> distributor, and
> air cleaners . . . . . . . . . . . . 11h  30m
>
> BDC.41 Door
> window winder assembly, remove and refit or fit new . . . . 3h  15m
>
> 12,000
> miles service . . . . . . . . . . 10h  30m
>
> SS.17 Swivel pin, remove and fit
> new and rebush, one side . . . . 4h --
>
> Find the full sheet here under
> MISCELLANEOUS/  "Schedule of Repair Times"
> http://healey6.com/technical.htm
>
> Rick
>
>
> "Madman in a death machine"
> Follow My Nasty Boy Build:
> http://tinyurl.com/yj52fwo
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>


-- 
Michael Salter