[Healeys] Wire wheel spline lube

[Don]

I have been using this grease called Super Impact Grease. # SIG-3000, the tube
says its for fleet and heavy equipment. One of the reasons I chose it was they
say it won't "pound out ".and I was tired of wiping off the grease from my
wire wheels and with me installing chrome wires I was even more concerned .
Well so far it is working out just fine .I live in Florida where it's hot a
lot and I have yet to see the grease on my wires.
         Don

Sent from my iPad

On Jun 12, 2013, at 1:50 PM, Bob Spidell <bspidell at comcast.net> wrote:

> Why not grease?
>
> Bob
>
>
> --------------------------------
> Bob Spidell - San Jose, CA
>
> ----- Original Message -----
>
>
> Hi Mitch,
>
> Anti seize compound.... not grease
>
> Curt
>
>
> On Wed, Jun 12, 2013 at 10:08 AM, <caddi5 at comcast.net> wrote:
>
>> hi
>>
>> what is the best lube for wire wheel splines? I am thinking about using
>> "permatex anti seize" silver.......................this appears to be
>> what the previous owner used and my hub splines are
>> perfect.............................of course the BJ8 has only 11,000 miles
>>
>>
>> Mitch
>>
>> 1959 BN4
>> 1966 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/fsufan1952@yahoo.com