[Healeys] Aluminum door trim

[jerry wall]

I disassembled many original healeys in the 70's/80's and all the ones iv'e
ever seen were anodized.
Cheers,

Ps.  Perhaps Peter Svilans will grace us with his considerable knowledge

jerry. wall
rowlett tx. check www.aquaflodrainage.com
On Jul 20, 2013 1:07 PM, "john spaur" <jmsdarch at sbcglobal.net> wrote:

> I think the reference in the Anderson-Moment book is wrong, however, I
> have the first set of corrections to the book that Gary Anderson sent out
> and this item was not on the corrections list.
>
> I don't think they are anodized the reproductions are not according to my
> anodizer.
>
> Gary Anderson will need to chime in on this to ascertain if the book
> reference is correct or not.
>
> John Spaur
>
> At 01:34 PM 7/20/2013 -0400, warthodson at aol.com wrote:
>
>> This is interesting. It does make sense that the door trim panels would be
>> anodized.
>> Does the Concours committee recognize that the aluminum door trim panels
>> were
>> anodized & do they deduct if the repros. are not?
>> Gary
>>
>> Op 20-7-2013 18:33, jerry wall schreef:
>> > anodized on the BN1-BJ8.
>> > page 53 of the anderson-moment confirms this, "The door shut face at the
>> > back and the rocker panels were covered with textured anodized aluminum
>> > trim pieces, ........."
>>
> ______________________________**_________________
> Support Team.Net http://www.team.net/donate.**html<http://www.team.net/donate.html>
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/**listinfo/healeys<http://autox.team.net/mailman/listinfo/healeys>
>
> Unsubscribe/Manage: http://autox.team.net/mailman/**
> options/healeys/jwbn6hrdtp@**gmail.com<http://autox.team.net/mailman/options/healeys/jwbn6hrdtp@gmail.com>