[Healeys] BJ8 brake caliper question

[Tom Felts]

Thanks Peter----it was definitely the pistons-------corrosion problem----had to blow one out this AM with a high pressure air hose.  Pretty messy in there?  Still waiting for my O/N parts and then remount and hopefully have it ready for the PVGP this weekend.

Tom
---- Peter Caldwell <peter at nosimport.com> wrote: 

=============
Tom,  Replace the hoses as they could be the actual cause, unless you 
are certain they are new.
         Peter C
=
At 05:04 PM 7/17/2013, Tom Felts wrote:
>Had my right caliper pistons seize today causing one HOT set of 
>brake pads and roter.  Pulled them and removed pistons----very dirty 
>as I suspected.  The piston cavities need a good cleaning.
>
>What do you use to make sure this surface is clean and shiny before 
>you replace the new pistons?  Don't want to sand blast---tried a 
>real fine steel wool, but can't get it as clean as I want.
>
>Thanks
>tom