[Healeys] How Fast Does My Drive Shaft Spin??David -

[Price Lindsay]

Thanks David -

I'm installing the Rostra 250-1223. I have the magnetic speed generator. I
also have the other type as well but the threads are too large to fit the
angle drive (I presume its for an american car). Can I cut the cable and
splice the generator in?  What do I need for this to work and where do I go to
get it?

Price Lindsay
67 BJ8

Sent from my iPhone

On Jul 10, 2013, at 5:15 PM, David Nock British Car Specialists
<healeydoc at sbcglobal.net> wrote:

> Which cruise control are you installing we have installed several in the
last few years and the best set up we found for the vehicle speed was to use a
speed generator that fits in the speedometer cable. You will need to have your
cable modified so that you have a short cable from the trans to the generator
and then another cable from the generator to the instrument.
>
>
>
>
>
> David Nock
> British Car Specialists
> Stockton Ca 95205
> 209-948-8767
>
> www.britishcarspecialists.com
>
> <bannersmall.jpg>
>
>
>
> Please feel free to view an interview with the Nock's in 2009
> 	Enjoy
> www.youtube.com/watch?v=QOTTRYkbQzs
> .
> .
>
> On Jul 10, 2013, at 2:19 PM, Price Lindsay wrote:
>
>> I am trying to install cruise control in my car and need to know the rate
of
>> spin of the drive shaft on a BJ8 while in overdrive?  I'm looking for the
>> number of revolutions per mile. This is a stock car with stock tires, rear
>> end, transmission and over drive.
>>
>> TIA
>>
>> Price Lindsay
>> 67 BJ8
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/healeydoc@sbcglobal.net