[Healeys] ring gear

[Robert F. Begani]

A good place to locate a thermostatically controlled oven is a potters
studio or a place where they fire clay pots.  Also, if you have a glass
blowing artist studio near you they can put it into the annealing oven.  If
you guys have a significant other who his involved in arts and crafts, they
would know these artists.

Regards,

Bob Begani
BJ8 Punta Gorda, Florida

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of Oudesluys
Sent: Friday, January 18, 2013 5:13 AM
To: healeys at autox.team.net
Subject: Re: [Healeys] ring gear

You will not be able to heat a ringgear evenly and at an predestined
temperature. That is why using a household oven or other thermostatically
controlled oven is preferable.
Kees Oudesluijs
NL

Op 18-1-2013 4:27, healeymanjim at hansencc.net schreef:
> never tried it, but would a propane or MAPP gas torch put out enough heat
to expand the ring gear enough to drop on to the flywheel?
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html Suggested annual 
> donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2013.0.2890 / Virusdatabase: 2639/6039 - datum van uitgifte: 
> 01/17/13
$12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/rfbegani@speakeasy.net