[Healeys] Seats Rails and Muffler Heat Insulation

[J. Scott Morris]

Hello Simon;  Here are some heat shield diagrams that may help somewhat. 
 
The first file can also be found at John Sims website.
See:  http://www.healey6.com/Technical/Dimensions%20&%20Patterns.pdf
 
For Greg Newton's heat shields, you can also get contact information in his ad
on the Ancaster British Car Flea Market website
 http://www.ancasterbritish.ca/ 
 
--Scott Morris; Simcoe, Ontario, Canada - Keep Smiling, Murphy Lives

--- On Thu, 1/10/13, Christine Atkinson <satkinson7314 at charter.net> wrote:


From: Christine Atkinson <satkinson7314 at charter.net>
Subject: [Healeys] Seats Rails and Muffler Heat Insulation
To: "'healey help'" <healeys at autox.team.net>
Cc: "'Atkinson, Simon'" <Simon.Atkinson at CapitolLight.com>
Received: Thursday, January 10, 2013, 7:31 PM


Finally getting back into the restoration after a 18month break!

Could really use some help in how to locate the correct places to drill
holes for the seat rails/slides and also the muffler insulation panel. I
searched the archives and online and could not find anything!

If you have any advice on measurements from X etc. and also the best order
to do this. Seat rails first etc.

If you could also copy your response to simon.atkinson at capitollight.com

Thanks for the help!!

Simon           1959 BT7 Left Hand Drive

[demime 1.01d removed an attachment of type application/pdf which had a name of Dimensions]

[demime 1.01d removed an attachment of type application/pdf which had a name of Floor-MkII]

[demime 1.01d removed an attachment of type application/pdf which had a name of Sources-Greg]