[Healeys] Engine Mounting Gasket

Alan Seigrist healey.nut at gmail.com
Tue Jan 8 07:29:13 MST 2013


Yes I actually agree on this.  Either the original style thin gasket or no
gasket at all is required here.

On Tue, Jan 8, 2013 at 10:22 PM, Steve Gerow <steveg at abrazosdata.com> wrote:

> John,
>
> IMHO the thicker the gasket the more likely to fail. I installed my rear
> plate with Permatex Aviation Form-a-Gasket in Feb 2008 and it still only
> leaks a drop every couple of weeks from the seal. The cam area is a
> non-issue.
>
> I also sealed the edges of the seal carrier with the same. I masked off the
> outline of the engine and sprayed the rear plate mating surface with 4 or 5
> coats of Permatex Copper Spray-a-Gasket.
>
> No paper gasket at all.
>
>
>
> See:
>
> http://www.pbase.com/stevegerow/image/97270433
>
>
>
> >>>
>
> Date: Mon, 07 Jan 2013 23:19:28 -0800
> From: john spaur <jmsdarch at sbcglobal.net
> <https://mbox.hoster902.com/compose.php?to=jmsdarch@sbcglobal.net> >
> To: healeys at autox.team.net
> <https://mbox.hoster902.com/compose.php?to=healeys@autox.team.net>
> Subject: [Healeys] Engine mounting plate gasket
> Message-ID: <6.2.3.4.2.20130107231036.0203f710 at pop.att.yahoo.com
> <
> https://mbox.hoster902.com/compose.php?to=6.2.3.4.2.20130107231036.0203f710
> @pop.att.yahoo.com> >
> Content-Type: text/plain; charset="us-ascii"; format=flowed
>
>
>
> John Spaur wrote:
>
> What thickness of gasket material should I use for between the rear
> mounting plate and engine?
>
>
>
>
> --
>
>
>
> Steve Gerow
>
> Altadena, CA, USA
>
> BN6
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com


More information about the Healeys mailing list