[Healeys] BN1 and BN2 front fenders - check me on this please.

[Curtis Arndt]

Paul,

You read something wrong. The BN1 fender distance is between 9" for the
later BN1s and 9 3/16" to 9 1/" for the very early BN1s.  The distance on
the BN2s is 7 1/2" making the BN2 wheel opening much larger.

Cheers,

Curt - AHConcours Committee

On Wed, Feb 27, 2013 at 11:05 PM, <fiat500f at aol.com> wrote:

> I need to check something.  With the 100-4, there are the BN1 front
> fenders,
> and the BN2 front fenders.  The easiest (only?) way to tell them apart is
> to
> measure the distance from the top of the wheel opening to the top of the
> fender.  Here is the Austin Healey service note about it.
> http://www.acmefluid.com.au/larry/a421.jpg
> It notes that the measured distance for the BN1 is 9 1/2 inches, and 9
> inches
> for the BN2.  I would SWEAR it was 11 inches for the BN1 and 9 inches for
> the
> BN2.  I just seem to have this strongly in my memory.  Am I wrong?  I would
> assume that the Healey service note is correct, but, dang!  :)
>  - Paul B.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/cnaarndt@gmail.com