[Healeys] Sidescreen questions

[Richard Collins]

So how are you guys installing the "glass"?
I did the rubber and have the new  felt to use but found it hard to do with
the lens in place. I have decided to replace the "glass/lexan" as well since
the original is a mess.

Regards,
Richard of KY
BN 7 #440

Sent from iPhone

On Feb 5, 2013, at 18:55, "Per Schoerner" <healeyguy at bredband.net> wrote:

> Derek
> Exactly what I'm doing as well, have done one so far exept for the felt
strip. The felt strip that I have removed was glued in place. Don't know with
what though, but I plan to use some textile glue, similar to contact glue.
>
> Yes, the front is fixed, and must be on the outside. On the early BN4s
though the front one was sliding, but you know that, don't you.
>
> Have you installed new rubber sealing strips? Someone told me some time ago
that this was an impossible task. It took some time, but far from impossible.
I used an old screwdriver that I had bent the tip of a little and filed off
all sharp edges.
>
> Per
>
> Derek Job skrev 2013-02-05 11:00: