[Healeys] Thread Chasing

[Mike Tobin]

Perry , John,
Thanks.  Duh!  I've got such tool, but never used it.  Now, if I can just
find it.
Mike
On Dec 15, 2013 4:25 PM, "john spaur" <jmsdarch at sbcglobal.net> wrote:

> I can't recall the TPI for the crank and cam shaft. However, check to see
> if you can get a thread restore tool with the TPI you need. It is a square
> file with eight different thread sizes. There are at least two different
> ones that restore 9, 10, 12, 16, 20, 27, 28 and 32 TPI and 11, 12, 13, 14,
> 16, 18, 20 and 24 TPI. They are not expensive and hardware stores usually
> have at least one of them.
>
> John
>
> At 03:56 PM 12/15/2013 -0500, Mike Tobin wrote:
>
>> The threads on the crank and cam ends are munged up.